91快播

 When crushing granite with a 91快播 crusher, the granite blocks are loaded into the mouth between the tooth plates from the upper part of the crusher, and gradually descend after being crushed. When the 91快播 crusher is crushing, part of its force is pressure and part is impact.
 

When loading granite into the 91快播 crusher, it should be evenly loaded on the side of the fixed tooth plate along the width of the entire charging port. The particle size of the granite loaded into the 91快播 crusher should not be larger than the charging port, otherwise the crusher will be blocked, which will easily cause the 91快播 crusher to stop and reduce the flow rate.

After starting the 91快播 crusher, you should wait until the shaking times are normal before loading granite. Using the mechanized charging method, if it is necessary to stop the operation of the 91快播 crusher, the feeder must be stopped first, and the crusher equipment can only be stopped after all the granite in the charging port is completely broken; if it is due to a power failure or a transmission belt When you need to stop due to an accident such as taking off, stop the feeder immediately. After eliminating the fault that caused the shutdown, remove the remaining granite in the crusher, and then start the 91快播 crusher according to the above rules.

All worn parts of the 91快播 crusher should be carefully lubricated. Therefore, during the working process of the 91快播 crusher, care must be taken to add oil to the oil tank that supplies fresh lubricating oil in time. When adding oil to the oil gu, it must be pressed until the new oil layer overflows from the gap between the journal and the bearing. The appearance of a new lubricating oil layer indicates that the waste lubricating oil has been pressed out by the new lubricating oil, and the lubricating oil hole is not blocked.