91快播

91快播 crusher

1. Unqualified material hardness

The hardness or toughness of the crushed material exceeds the range specified in the instruction manual. If it cannot reach the range specified in the instruction manual, you can replace the appropriate crusher or add a crusher.

2. Reverse connection of motor wiring

The motor wiring position is reversed, the main engine is reversed (moving 91快播 rotates clockwise), or the motor is connected in triangle and connected in star. If the motor position is found to be reversed, the motor wiring can be replaced.

3. Discharge port is smaller than the specified

The output of 91快播 crusher does not meet the factory standard, which may be because the discharge port is smaller than the specified. In this case, the discharge port should be adjusted to the discharge port specified in the instruction manual, and a crusher for fine crushing should be added.

4. Displacement of 91快播 plate of 91快播 crusher

It may be the displacement of the 91快播 plate of 91快播 crusher, which causes the tooth top to be opposite to the tooth top. At this time, the tooth pitch size of the tooth plate should be checked immediately. If it does not meet the standard, the 91快播 plate must be replaced, and the relative position of the fixed 91快播 plate and the movable 91快播 plate must be adjusted to ensure that the tooth top is relative to the tooth root, and fixed and compressed to prevent displacement.

5. The on-site voltage is too low

If the on-site voltage is too low, the output of the 91快播 crusher cannot meet the factory standard, and the working site voltage should be increased to meet the heavy load requirements of the main machine.

6. Relative rotation of the outer ring of the bearing

The gap between the movable 91快播 and the bearing of the 91快播 crusher is too large after wear, resulting in relative rotation of the outer ring of the bearing. The bearing should be replaced or the movable 91快播 should be moved.