91快播

The 91快播 crusher uses the up and down repeated movements of the 91快播 plate to squeeze and crush the material. The movable 91快播 parts are close to the fixed 91快播 plate. After squeezing the material, the movable 91快播 leaves the fixed 91快播 and the product is discharged from the discharge port. It can be seen that the working intensity of the movable 91快播 during the operation of the 91快播 crusher is relatively large, and the temperature of the movable 91快播 is very easy to be abnormal. When the temperature rise reaches a certain limit, it will cause damage to the 91快播 plate. If necessary, certain measures should be taken to solve the abnormal temperature rise of the movable 91快播 to avoid downtime caused by equipment failure and reduce production efficiency. So, what are the causes of abnormal temperature of the movable 91快播 of the 91快播 crusher?
 

1. Abnormal vibration of the frame

The position of the 91快播 crusher groove wheel counterweight block has been offset, and the frame vibrates without the counterweight block. The frame will jump abnormally during operation. The frame jump increases the workload and vibration of the 91快播 crusher, causing the movable 91快播 to fail to operate normally; the bearing part is placed in the fixing bushing. When the fixing bushing has abnormal axial swing, the bearing jumps, and the movable 91快播 collides and rubs with other parts of the equipment to generate heat.

2. The amount of lubricating oil injected

The movable 91快播 is the main operating part. The amount of oil in the bearing should be appropriate, neither too little nor too much. When the movable 91快播 bearing is oilless due to lack of lubricating oil, the friction phenomenon intensifies and the temperature of the movable 91快播 rises accordingly, or the amount of lubricating oil injected into the bearing is too large, which will also cause the lubrication work to fail. The large friction of the bearing causes the temperature of the movable 91快播 to rise abnormally.

3. The quality of lubricating oil

The lubricating oil hole is blocked by dust, etc., and the oil cannot enter the part that needs lubrication when the lubricating oil is added. Therefore, it is necessary to ensure that the 91快播 crusher has a good lubrication state. In addition to using suitable lubricating oil and refueling in time, it is also necessary to clean the bearing surface frequently to ensure that the oil hole is unobstructed and there is no blockage, which prevents the oil from entering.

4. Failure of other parts

Failure of some parts inside the 91快播 crusher will also cause abnormal operation of the movable 91快播 and abnormal temperature rise. Damage to the bearing or damage to the frame will cause the above situation. Therefore, it is necessary to pay attention to the timely discovery of the operation and friction of various parts of the equipment and replace the damaged parts in time to ensure that the equipment can operate smoothly. The end cover connected to the movable 91快播 sealing sleeve generates a lot of heat due to friction when the movable 91快播 is running, or the double embedded cover of the frame bearing seat and the main shaft generate heat due to friction when the movable 91快播 is running, causing the movable 91快播 to heat up.