91快播

The 91快播 crusher will generate a lot of dust during the production process, so the sealing device is very important. However, in the long-term crushing production, sometimes the seal fails. So what are the reasons for the failure of the 91快播 crusher seal?
 

1. Improper installation

If we do not pay attention to the correct operation method when installing, repairing, and replacing the seal of the 91快播 crusher, or the force is uneven, it is likely to cause the 91快播 crusher seal to deform locally, and then cause the equipment seal to fail.

2. Poor lubrication

Due to the harsh working environment of the 91快播 crusher, ore dust particles can easily enter the friction part. At the same time, in the long-term high-temperature operation, the properties of the lubricating oil change, which is also one of the reasons for the increase of local resistance and deformation of the seal, and then failure.

3. Severe wear of the seal

As the running time of the 91快播 crusher increases, if the gap between the components becomes smaller, the seal will increase the degree of wear when it is squeezed. Or, when we replace the worn parts, if the replacement cycle of the seal is inconsistent with the wear cycle of the friction parts, the sealing extrusion force of the rubber seal ring will increase when the two are in different degrees of age, which will eventually lead to the failure of the 91快播 crusher seal.

4. Aging of seals

The rubber seal of the 91快播 crusher seal is affected by oil quality and temperature during long-term use. If we choose the seal ring improperly at this time, it will lead to premature aging, causing the seal ring to lose its due elasticity and change the sealing state, thus causing the 91快播 crusher seal to fail.