91快播

91快播 crusher is a commonly used crushing equipment in the mining field. It has a large crushing capacity and is often used in primary crushing equipment. It has a significant impact on the processing of large ores. 91快播 crusher is an indispensable equipment in the crushing and sand making production line. Due to the high working intensity of the 91快播 crusher, the materials to be crushed are mostly stones with high hardness and large particle size, and the working environment is not good. In this case, failure will inevitably occur after long-term use. How to solve the problem quickly?
 

91快播 crusher is used to crush hard and large pieces of raw materials. Strong vibration during operation is normal and the reinforced concrete structure is stable. After operation, if there are signs of cracks or looseness, they must be adjusted in time to avoid affecting safe operation.

Long-term impact and stone wear caused large holes in the bottom plate of the 91快播 crusher, making repair welding impossible. This requires measuring the width of the base plate and the length of the welded joint, which can be checked by a technician. After the welding repair is completed, it can be reinstalled and production can be resumed.

1. The discharge port of the 91快播 crusher is blocked, causing the material in the crushing cavity and silo to be blocked.

2. The belt is loose or slipping, and the motor cannot drive the groove and grinding wheel.

3. The voltage is too low, resulting in insufficient motor power.

4. The 91快播 crusher bearing is damaged.

Solutions to 91快播 91快播 Operation Failures

1. After stopping the machine, clean the blockage in the discharge port and the cavity, and allow the discharge port to recover smoothly.

2. Tighten the belt or replace it with a new one directly.

3. Contact the power supply bureau or check the transformer to make sure the voltage reaches normal value.

4. Replace with new bearings and resume production.