Ｗ丑补迟蝉础辫辫
Wechat
Leave Message
91快播 crusher
1. Adjust spring preload pressure
Sometimes the 91快播 crusher will cause abnormal noise in the equipment due to the inertia force generated by insufficient spring pre-tensioning pressure. The user can reduce the noise of the equipment by adjusting the pressing force of the spring, but the spring pressure must also be paid attention to and cannot be too high. Loose or too tight.
2. Ensure that the flywheel operates normally
When the V-belt is not tightened properly, it may cause the flywheel to rotate abnormally and deviate from the machine position, which will cause the 91快播 crusher to produce noise. Therefore, it is necessary to ensure that the V-belt has appropriate tightness. If the fly groove wheel is in an improper position, you need to remove the fly groove wheel and readjust the position.
3. Strictly control the feeding of materials
Control the feeding situation of the 91快播 crusher, and prohibit the particle size or moisture content of the material from exceeding the feeding requirements of the 91快播 crusher. When operating the 91快播 crusher, the operator is prohibited from entering impurities into the equipment, so that It can prevent the equipment from producing abnormal noise during work and extend the service life of the 91快播 crusher.
4. Fasten parts in time
Since the 91快播 crusher will produce large impacts during operation, it may cause the internal parts of the equipment to fall off or become loose. It is necessary to regularly check the tightening of the internal parts of the equipment and tighten the nuts, bolts and other parts of the equipment in a timely manner.
5. Do a good job of lubrication
Do a good job in lubrication of the 91快播 crusher. Poor lubrication will cause the 91快播 crusher to operate uncoordinated and produce abnormal noise. Therefore, the 91快播 crusher must be cleaned regularly and the 91快播 crusher must be properly lubricated. The lubrication and maintenance work of the machine can ensure the coordination between equipment parts and reduce the generation of noise.
